Uses of Class
soot.toDex.instructions.AbstractInsn

Packages that use AbstractInsn

Package	Description
soot.toDex.instructions

Uses of AbstractInsn in soot.toDex.instructions

Subclasses of AbstractInsn in soot.toDex.instructions

Modifier and Type	Class and Description
class	AbstractPayload Abstract base class for all payloads (switch, fill-array) in dex instructions
class	AddressInsn Inspired by com.android.dx.dex.code.CodeAddress: pseudo instruction for use as jump target or start/end of an exception handler range.
class	ArrayDataPayload Payload for the fill-array-data instructions in dex
class	Insn10t The "10t" instruction format: It needs one 16-bit code unit, does not have any registers and is used for jump targets (hence the "t"). It is used by the "goto" opcode for jumps to offsets up to 8 bits away.
class	Insn10x The "10x" instruction format: It needs one 16-bit code unit, does not have any registers and is used for general purposes (hence the "x"). It is used by the opcodes "nop" and "return-void".
class	Insn11n The "11n" instruction format: It needs one 16-bit code unit, has one register and is used for a 4-bit literal (hence the "n" for "nibble"). It is used by the opcode "const/4".
class	Insn11x The "11x" instruction format: It needs one 16-bit code unit, has one register and is used for general purposes (hence the "x"). It is used e.g.
class	Insn12x The "12x" instruction format: It needs one 16-bit code unit, has two registers and is used for general purposes (hence the "x"). It is used e.g.
class	Insn20t The "20t" instruction format: It needs two 16-bit code units, does not have any registers and is used for jump targets (hence the "t"). It is used by the "goto/16" opcode for jumps to a 16-bit wide offset.
class	Insn21c The "21c" instruction format: It needs two 16-bit code units, has one register and is used for class/string/type items (hence the "c" for "constant pool"). It is used e.g.
class	Insn21s The "21s" instruction format: It needs two 16-bit code units, has one register and is used for a 16-bit literal (hence the "s" for "short"). It is used by the opcodes "const/16" and "const-wide/16".
class	Insn21t The "21t" instruction format: It needs two 16-bit code units, has one register and is used for jump targets (hence the "t"). It is used e.g.
class	Insn22b The "22b" instruction format: It needs two 16-bit code units, has two registers and is used for a 8-bit literal (hence the "b" for "byte"). It is used by the "/lit8" opcodes for binary operations.
class	Insn22c The "22c" instruction format: It needs two 16-bit code units, has two registers and is used for class/type items (hence the "c" for "constant pool"). It is used e.g.
class	Insn22s The "22s" instruction format: It needs two 16-bit code units, has two registers and is used for a 16-bit literal (hence the "s" for "short"). It is used by the "/lit16" opcodes for binary operations.
class	Insn22t The "22t" instruction format: It needs two 16-bit code units, has two registers and is used for jump targets (hence the "t"). It is used e.g.
class	Insn22x The "22x" instruction format: It needs two 16-bit code units, has two registers and is used for general purposes (hence the "x"). It is used by the opcodes "move/from16", "move-wide/from16" and "move-object/from16".
class	Insn23x The "23x" instruction format: It needs two 16-bit code units, has three registers and is used for general purposes (hence the "x"). It is used e.g.
class	Insn30t The "30t" instruction format: It needs three 16-bit code units, does not have any registers and is used for jump targets (hence the "t"). It is used by the "goto/32" opcode for jumps to a 32-bit wide offset.
class	Insn31i The "31i" instruction format: It needs three 16-bit code units, has one register and is used for a 32-bit literal (hence the "i" for "integer"). It is used by the opcodes "const" and "const-wide/32".
class	Insn31t The "31t" instruction format: It needs three 16-bit code units, has one register and is used for jump targets (hence the "t"). It is used e.g.
class	Insn32x The "32x" instruction format: It needs three 16-bit code units, has two registers and is used for general purposes (hence the "x"). It is used by the opcodes "move/16", "move-wide/16" and "move-object/16".
class	Insn35c The "35c" instruction format: It needs three 16-bit code units, has five registers and is used for method/type items (hence the "c" for "constant pool"). It is used by the "filled-new-array" opcode and the various "invoke-" opcodes. IMPLEMENTATION NOTE: the wide args for "35c" must be explicitly stated - internally, such args are implicitly represented by e.g.
class	Insn3rc The "3rc" instruction format: It needs three 16-bit code units, has a whole range of registers (hence the "r" for "ranged") and is used for method/type items (hence the "c" for "constant pool"). It is used by the "filled-new-array/range" opcode and the various ranged "invoke-" opcodes.
class	Insn51l The "51l" instruction format: It needs five 16-bit code units, has one register and is used for a 64-bit literal (hence the "l" for "long"). It is used by the opcode "const-wide".
class	InsnWithOffset An abstract implementation for instructions that have a jump label.
class	PackedSwitchPayload The payload for a packed-switch instruction.
class	SparseSwitchPayload The payload for a sparse-switch instruction.
class	SwitchPayload The payload for switch instructions, usually placed at the end of a method.